Kilt Measuring Guides

To ensure your kilt fits perfectly, it’s essential to take accurate measurements. Follow our simple guide below, and don’t forget — measure twice to be sure!

1. Waist

Decide where you’d like your kilt to sit. Traditionally, kilts are worn at the natural waist — slightly above the belly button and higher than modern trousers. Alternatively, you can wear it lower, closer to your hips, depending on your comfort and style preference.

Tip: For gentlemen with a fuller figure, wearing the kilt higher is often more flattering, allowing the fabric to fall smoothly.

Use a measuring tape and wrap it around where you want the top of the kilt to sit. Pull the tape snug but not tight — no sucking in or pushing out your stomach. Stand naturally and record the measurement.

2. Hip

Measure around the widest part of your hips. To find this spot, stand with your back against a wall and gently move backward — the area that touches the wall first is typically where to measure. Keep the tape level and relaxed around this point.

3. Fell Measurement

The fell is the distance between your waist and hip measurements. Measure straight down from the waistline (where you took your waist measurement) to the hip line (where you took your hip measurement). This length helps shape the pleats and gives the kilt its signature movement.

4. Kilt Length

A kilt is traditionally worn to the knee.

• For a classic look, measure from the waist down to the top of your kneecap.

• For a more casual, contemporary style, you might prefer it to fall at the bottom of the knee.

Stand tall and straight while someone measures from your waistline to your desired kilt length at the knee.

Alternative Method: Bend on one knee and measure from your waist to the floor for a quick check.

Important: Double-check your measurements, and if anything seems off or unclear, don’t hesitate to contact us for advice.

Accurate measurements ensure a sharp, tailored fit for your kilt jacket. Follow these steps carefully:

1. Neck Size

Wrap the measuring tape around your neck, about one inch above your shoulders, roughly at the base of your Adam’s apple. Keep a finger between the tape and your neck for comfort. Ensure the tape is level and note the measurement.

2. Shoulder Width

Measure from the edge of one shoulder to the other, across the back. These points are where your shoulder meets your arm. Run the tape straight across the upper back, just below the neck.

3. Chest

Measure around the widest part of your chest, under your arms and across the shoulder blades. Keep the tape flat, level, and snug while standing naturally. Record this measurement while in a relaxed position.

4. Waist Size

Wrap the tape around the widest part of your stomach, usually at or just above the belly button. Keep yourself relaxed, without holding your breath, and note the measurement.

5. Sleeve Length

Place one end of the tape at the shoulder point where the arm meets the shoulder. Run it along the outside of your arm to the wrist bone. Slightly bend your arm during measurement to allow for natural movement and a comfortable fit.

6. Back Length

Measure from the base of your neck (center back) down to your natural waistline (across the belly button). This ensures the jacket length is properly proportioned.

7. Height

Stand straight against a wall without shoes and measure from the top of your head to the floor for your total height.

---

Final Notes

Accurate measurements are the key to a great fit. We recommend checking each measurement twice for consistency. If you have any doubts or need guidance, our team is always here to assist.